BEST

Konkuk Signature Event

Four signature treatments at the heart of Toxnfill Konkuk

210,000KRW~
#LowPainSkinBotox #UltherapyPrime #ThermageFLX
#PointLiftingFiller #MDCodeFiller
Total amount

0KRW

10% VAT excluded

시술내용

toxnfill

KONKUK BRANCH

SIGNATURE EVENT

SIGNATURE EVENT

Four signature treatments at the heart of Toxnfill Konkuk

Low-Pain Skin Botox

Full Face Skin Botox · Opened in Front of You

Low-Pain Full Face Skin Botox

*Opened in Front of You*
Botulax
350,000 KRW 210,000 KRW
Coretox
400,000 KRW 240,000 KRW
Xeomin
470,000 KRW 290,000 KRW

Ultherapy Prime

Ultrasound Lifting · 300 Shots · 400 Shots

Ultherapy Prime 300 Shots

1,500,000 KRW 890,000 KRW

Ultherapy Prime 400 Shots

1,900,000 KRW 1,190,000 KRW

Thermage FLX

RF Tightening · 300 Shots · 600 Shots

Thermage FLX 300 Shots

1,500,000 KRW 990,000 KRW

Thermage FLX 600 Shots

2,500,000 KRW 1,690,000 KRW

Ultherapy Prime 300 Shots + Thermage FLX 600 Shots + Low-Pain Full Face Skin Botox (Coretox)

4,300,000 KRW 2,690,000 KRW

Lifting Filler

Chief Director Only · Point Lifting · MD Code

[Chief Director Only] Point Lifting Filler 2cc (Restylane)

1,000,000 KRW 800,000 KRW

[Chief Director Only] MD Code Lifting Filler 6cc (Juvederm)

3,200,000 KRW 2,300,000 KRW

[Chief Director Only] MD Code Lifting Filler 10cc (Juvederm)

5,000,000 KRW 3,300,000 KRW

Q&A

Frequently Asked Questions

Q. How should I choose between Low-Pain Skin Botox, Ultherapy Prime, Thermage FLX, and Lifting Filler?

The first thing to consider is which concern bothers you most.

If your main concerns are fine lines, skin texture, and subtle expression lines across the face, Low-Pain Skin Botox may be suitable. If lifting sagging cheeks or defining the jawline is the priority, Ultherapy Prime may be worth considering. If loss of firmness, fine lines, and skin tightening are your main concerns, Thermage FLX may be a better fit. If hollow areas, structural support, and facial proportions need to be restored, Lifting Filler may be considered. When sagging, loss of firmness, and volume loss occur together, two or more treatments may be combined based on your facial structure rather than relying on a single treatment.

Q. How is Low-Pain Full Face Skin Botox at Konkuk Branch different from regular Skin Botox?

The difference lies not in changing the principle of Skin Botox itself, but in using a detailed protocol designed to reduce discomfort during full-face treatment.

At Konkuk Branch, topical anesthesia is applied carefully for at least 30 minutes. The Botox product is then opened in front of you and mixed with the low-pain solution. Using a thin, ultra-fine needle, the product is injected evenly into the dermal layer according to the skin condition and treatment area. Pain levels vary by individual, and this does not mean the treatment is completely pain-free.

Q. How are lifting devices such as Ultherapy and Thermage different from Lifting Filler, and when are they combined?

The main difference is that lifting devices target sagging and skin firmness, while Lifting Filler addresses volume loss and facial support.

Ultherapy Prime and Thermage FLX use ultrasound and radiofrequency energy to improve sagging and skin firmness. Lifting Filler, on the other hand, restores volume in hollow areas and reinforces key support points to improve overall facial proportions and contours. If sagging is the main issue, device-based lifting may be considered first. If volume loss in areas such as the front cheeks, side cheeks, or temples makes the face look hollow, Lifting Filler may also be considered. The key is not simply to “lift” or “fill,” but to assess how much sagging and volume loss are present and select the treatments accordingly.

Q. How do I choose between Ultherapy Prime 300 Shots and 400 Shots?

More shots are not always better. The number of shots should be selected based on face size, the extent of sagging, and the target depth.

300 shots may be suitable when focusing on key lifting areas such as the jawline or sagging cheeks. 400 shots may be considered when treating a wider area or addressing sagging in multiple regions. At Konkuk Branch, DeepSEE™ real-time ultrasound imaging is used to visualize the structures beneath the skin. Depending on the characteristics of areas such as the cheeks, jawline, and eye area, the appropriate target depth is selected using 1.5mm, 3.0mm, or 4.5mm transducers. This means that even with the same 300 or 400 shots, the actual placement can vary depending on facial shape, volume, and the location of sagging.

Q. What is the difference between Ultherapy Prime and Thermage FLX, and when should each be chosen?

Ultherapy Prime uses focused ultrasound energy delivered to targeted depths for lifting, while Thermage FLX uses radiofrequency energy to improve skin firmness and tightening.

If lifting the facial contours, such as sagging cheeks and the jawline, is the main priority, Ultherapy Prime may be considered first. If fine lines, overall loss of firmness, and skin tightening are the main concerns, Thermage FLX may be a better option. Because sagging and loss of skin firmness often occur together, one treatment may be selected or both may be combined depending on the individual condition.

Q. How do I choose between Thermage FLX 300 Shots and 600 Shots?

300 shots may be used for more focused treatment, while 600 shots may be considered for broader full-face care.

If loss of firmness is concentrated in specific areas such as the cheeks or jawline, 300 shots may be appropriate. If you want to address overall facial firmness, fine lines, and tightening, 600 shots may be considered. Rather than distributing the shots evenly according to a fixed formula, it is important to first identify the areas where loss of firmness is most noticeable and place the shots accordingly.

Q. Why combine Ultherapy Prime 300 Shots + Thermage FLX 600 Shots + Low-Pain Full Face Skin Botox?

This combination addresses sagging, skin firmness, and fine lines through different approaches.

Ultherapy Prime delivers ultrasound energy to targeted depths based on facial contours and sagging. Thermage FLX uses radiofrequency energy to improve skin firmness and tightening. Adding Full Face Skin Botox also helps address fine expression lines and skin texture. This combination may be considered when facial sagging, reduced skin firmness, and fine lines are present at the same time. The exact combination, energy settings, and dosage are determined according to the current facial structure and skin condition.

Q. What is the difference between Point Lifting Filler 2cc and MD Code Lifting Filler 6cc or 10cc?

Point Lifting Filler focuses on specific areas that need support, while MD Code Lifting Filler takes a broader approach to facial structure, support, and overall proportions.

If the main goal is to improve one or two hollow areas or key support points, 2cc Point Lifting Filler may be considered. MD Code evaluates multiple facial points, such as the cheekbones, front cheeks, nasolabial folds, and jawline, and distributes filler according to where support is needed rather than simply filling hollow areas. The choice between 6cc and 10cc does not mean that more is always better. It depends on the extent of the areas that need correction, existing facial volume, and asymmetry. The goal is to achieve overall balance using only the amount of volume that is needed.

Q. How can I verify authentic products and the actual treatment amount for Ultherapy, Thermage, Skin Botox, and Filler?

Toxnfill Konkuk Branch provides ways for patients to directly verify the products used for each treatment.

Ultherapy Prime uses authentic transducers, and the NFC-based authentication system, Touch Prime, allows patients to verify authenticity and the actual number of shots used. For Thermage FLX, one genuine disposable tip is used per patient. Patients can check the authentic tip and its opening process before treatment, and a certificate of authenticity is provided afterward. For injectable treatments such as Skin Botox and Filler, the product is also opened in front of the patient so that the selected product and dosage can be verified.

Recommended for Those Who
  • POINT 1

    Those looking for full-face
    Skin Botox to address both expression lines
    and skin texture.

  • POINT 2

    Those considering focused ultrasound lifting for sagging cheeks and jawline concerns.

  • POINT 3

    Those considering RF lifting focused on skin firmness
    and tightening.

  • POINT 4

    Those looking to address sagging, loss of firmness, and expression lines all at once.

  • POINT 5

    Those looking to naturally enhance hollow areas or specific facial contours
    with filler.

  • POINT 6

    Those seeking MD Code lifting filler that considers overall facial volume and proportions.

Precautions

Self-care is as significant as skincare for treatment effects.
Please read through cautions closely and follow them.

  • It is recommended to avoid excessive drinking, saunas, jjimjilbangs, hot baths, and strenuous exercise after the treatment.
  • Temporary injection-site bumps, bruising, swelling, mild pain, or redness may occur after treatment and usually subside within a few days.
  • It is recommended to use a moisturizer frequently, and always apply sunscreen when going outside.
  • Please take your prescribed medication consistently for 3 days to prevent inflammation and reduce pain. If you have a history of allergies to antibiotics or any other medications, please be sure to inform us.
  • Bruising, swelling, pain, or foreign body sensation may occur but usually improve within 1-2 weeks. However, if pain worsens despite medication, or if you experience skin color changes, blisters, itching, or persistent heat at the treatment site, please contact the clinic and visit us promptly.
  • Please be careful not to compress the treated area for 2–3 weeks as there may be changes in shape due to external pressure.
    (e.g., avoid wearing hats, sleeping face down or on your side, wearing glasses, ultrasound & high-frequency treatments, facial acupressure massage).
On-line consultaion